New Models & Products
NEW MODELS & PRODUCTS
HONDA 750 SEAT
A custom contour diamond pattern seat for the Honda CB750 now is available from Suzuki Fun Center, 515 N. Victory Blvd., Dept. CW-9, Burbank, CA 91502. The seat is constructed on a 12-ga. steel plate with polyurethane foam padding, covered in black naugahyde. Felt undercover is utilized on the bottom plate to prevent frame scratches. The seat is available in 2-in. thickness for $39.50 or 4-in. for $49.50.
CYCLE-LOCKER
The new Gibraltar Cycle-Locker attaches to all makes of motorcycles, and features weatherproof locks and hinges. An optional 3-in, foam backrest also is available. The padded interior is large enough to hold two helmets and jackets or an assortment of other neces sities for the traveler. It's available in red, black or white, for $39.95, or $47.95 with backrest, from Gibraltar Plastic Products Corp., 12885 Foothill Blvd., Dept. CW-9, San Fernando, CA 91340.
CUSTOM KICKER
Machined of top quality steel and featuring a distinctive 4-hole custom design, this new kick pedal for H-D 74s and Sportsters is chrome-plated and retails for $8.95. The pedal may be obtained from Wheel Specialties, 2131 S. Dupont Dr., Dept. CW-9, Anaheim, CA 92806.
THEFT-RESISTANT LOCK & CHAIN
Mountain West Alarm has developed a theft-resistant lock and chain for motorcycles. The chain is 4-ft. long, high carbon, 9/32-in. steel. Each link is wèlded from case hardened steel specially formulated to resist cutting with bolt cutters or hack saws. The blue-chromed chain is covered with tough plastic sleeving. The padlock is secured with a round key, 7-pin “pick resistant” cylinder. The hardened steel shackle and case are triple chrome-plated for maximum anti-drilling protection, lasting finish, and corrosion resistance. Hardened steel locking balls secure the deadbolt shackle at both heel and toe. Another hardened ball is incorporated in the keyway to foil circular drilling. The MW-015 security set retails for $16 from Mountain West Alarm, Dept. CW-9, 4215 N. 16th St., Phoenix, AZ 85016.
EMERGENCY LIGHT
A transistorized emergency unit that switches on a powerful amber light when triggered by the headlight of an approaching vehicle has been developed by Pittari’s. The light keeps flashing until the vehicle has passed. It also features a built-in, white, steady beam, torch light and a magnetic clip attachment. The Blinki Lux is priced at $13.95 from Pittari’s of New York, 63-17 74th St., Dept. CW-9, Queens, NY 1 1379.
TWIST GRIP LEVERAGE
S&S Engineering has developed a grip which is said to provide more leverage for motorcycle throttles. The black ano dized, non-glare finish lever is clamped into place on the end of the throttle grip with a single screw. Priced at $1.95, the Twist Grip Lever is sold at most motorcycle dealers. Catalog No. 201-SF, available from S&S Engineering, Box 1646, Dept. CW-9, Thousand Oaks, CA 91360, shows its entire line of accessory and performance items.
ROAD RIDERS' SAMPLE!
HONDA PANEL
An accessory panel for Honda 750s, 500s and 450s recently introduced by Big River Bike Products contains the ignition switch and a cigarette lighter. The unit mounts to the front handlebars using two bottom stock bolts. The cast aluminum panel is 8-in. across and a hole is predrilled for the stock ignition switch. No rewiring is necessary. A satin-finished raised area in the center of the panel for engraving, decals, or mounting switches is optional. The aluminum panel is finished in flat black and textured to prevent glare. Big River Bike Products, P.O. Box 4798, Dept. CW-9, Panorama City, CA 91412, sells the unit for $ 11.95.
ACCESSORY CATALOG
AFS Distributors has just released a new catalog featuring a complete line of motorcycle accessories. Details may be obtained from AFS Distributors, Dept. CW-9, Lewistown, PA 17044.
CHROMED ACCESSORIES
Cycle Craft is offering a new line of accessories made from high-quality steel and fabricated to rigid tolerance controls, then chrome-plated with four coats of plating. Items shown include a motorcycle chain belt with buckle, dog bone, struts, tee mount, aluminum twig bar, and highway bar. Prices and information are available from Cycle Craft, P.O. Box 88, Dept. CW-9, East Hartford, CT 06108.
SOLO SADDLE
This solo saddle designed by CorbinGentry is for rigid or hardtail motorcycles. It is available with matching sculptured pillion for the fender. The saddle comes with bolts in the bottom for easy adaptation to any T-shape bracket kit. Details on the Dragoon Mark 2 saddle may be obtained from Corbin-Gentry, Inc., Route 83, Dept. CW-9, Ellington, CT 06029.
THROTTLE ASSISTANCE
The Twist-Assist is a throttle helper device which mounts in the end of the right handlebar. The handlebar conceals everything except two washers and nuts, which cap a small shaft protruding from the end of the twistgrip. The unit is held in place by tightening a tapered expander ring into the tubular body while the Twist-Assist is inside the handlebar. When the unit is employed, less drag friction is said to be required to hold the throttle in place and it will maintain a constant position. The Twist-Assist is designed to fit all standard 7/8-in. handlebars and will adapt to small variances in inside diameter. It is available from CMB Mfg. Co., Box 57, Dept. CW-9, Tempe, AZ 85281, for $7.95 postpaid.
CHAIN GUARD
Dixie Tool & Die Co. has designed an enclosed chain guard to catch oil used for lubrication and eliminate the oil slinging problem. The guard is made of Cycolac and is said to be easily installed in minutes. The unit is priced at $32.50. Details are available from Dixie Tool & Die Co., Dept. CW-9, 1054 Douglas Ave., Aurora, II 60538.
...GOODIES FOR DIRT RIDERS
MOTOCROSS GUARDS
Motocross shin and knee guards, molded of high tensile polyethlene, are being offered by Lynn Wilson Motorcycle Specialties, Dept. CW-9, Box 653, Chatsworth, CA 91311, for $ 15.95. The vented shin section is backed with blue felt padding, while the heavy-duty canvas leg sling has three adjustable elastic web straps. There’s also a leather antichafe guard for the ankle. A catalog featuring the guards and other motorcycle equipment sells for 50 cents.
WEIGHT WATCHER SPROCKETS
Circle Industries has developed the “Weight Watcher” aluminum alloy sprocket, with lightening holes to reduce the weight by a third. The sprockets are said to improve handling characteristics on the road, track or in loose sand. More information is available from Circle Industries, Dept. CW-9, 2636 Seaman Ave., South El Monte, CA 91733.
DIRT RIDER SPORTSWEAR
Wheat colored jackets and jeans made of tightly woven, heavy twill, 50 percent polyester and 50 percent cotton now are manufactured by Parr of Arizona. The washable material is said to provide great abrasion resistance while allowing the body to breathe. The jacket is available in chest sizes 36-44 regular and extra long for $16, while the jeans come in 28-36 waist sizes, uncuffed, for $16, or $1 more for finished bottoms, from Parr of Arizona, Dept. CW-9, 3803 N. 16th St., Phoenix, AZ 85016.
COMPETITION BARS
Casler’s new handlebar line offers both black oxide and chromed finishes and a standard cross brace. The bars are available in eight different combinations of rise, crown and width, and without the cross brace if desired. Details and prices may be obtained from Casier Motorcycle Accessories, 1031 W. Brooks, Dept. CW-9, Ontario, CA 91762.
TOOL BOX-PLATE
Hercules Distributing, Ltd. now of fers the Preston Petty lightweight, plas tic number-plate tool box. The unit fastens to a bike's forks in seconds with non-slip plastic strips. Hinges on the sides allow the number plate to be flipped open for access to a tool kit. A foam block is provided to prevent the tools from rattling around. The unit sells for $9.95 and is available through local dealers.
MOTOCROSS BOOTS
Danner has introduced a motocrossstyle boot featuring Sieberling full composition soles with special heels for maximum gripping power. The 16-in. uppers are made of black, full-grained, oil-tanned leather with double vamps. There are no buckles or protrusions to catch on things. Available in two styles, the unlined model sells for $53 while the garment tanned cowhide lined model is $58 from Danner Shoe Manufacturing Co., 110 S.E. 82nd Ave., Portland, OR 97216.
(Continued on page 84)
Continued from page 82
FULL COVERAGE HELMETS
Buco has developed the full-coverage “Racing GT” helmet, featuring special colors and styling. A specially-designed “flare-out” scoop at the bottom of the face shield is said to make it aerodynamically sound, permitting high speeds without air pressure pushing the helmet up on the head. The custom design interior is fully lined and padded, with molded crown pad and ear-cheek protection. The helmet is certified to MS&ATA and Z90 standards and is AMA and SHCA approved. More information may be obtained from Buco Products, 7652 Burnet Ave., Dept. CW-9, Van Nuys, CA 91405.
TEAR-OFF LENSES
Circle Industries is manufacturing quick change, tear-off lensed goggles allowing racers to have three lens changes during a race. The goggles feature automatic molded-in venturi ventilation, which is said to ensure fog-free vision. They come in regular and super wide models, or with an inner carrier for insertion of prescription lenses for those who wear glasses. Additional information is available from Circle Industries, 2536 Seaman Ave., Dept. CW-9, South El Monte, CA 91733.
