New Models & Products
NEW MODELS & PRODUCTS
GAS TANK POUCH COMBO
New from the Leatherwerks are these three way combination pouches, designed to fit the gas tanks of all BMWs and Honda Fours. Leatherwerks pouches are completely hand made to order from 8 oz. chrome tanned latigo hides. Sewn with waxed nylon cord, they are double stitched at points of stress. Nickel plated roller buckles and rivets are featured, and inner flaps prevent small items from working out. Available in either black or brown, Leatherwerks pouches cost $74, postpaid. The side pouch combination alone sells for $52. All units are felt backed. When ordering, specify make, model, year and color desired. Send orders to Leatherwerks, Dept. CW-6, P.O. Box 917, Tarzana, CA 91356.
COMPETITION FORK DAMPER KIT
Fun'N Fast, following up their competition fork dampening kit for Yamaha AT-1 and CT-1 models, has developed a fork dampening kit for Yamaha DT-1C, DT-1M, RT-1 and RT-1M models. The manufacturer guarantees that this kit will add a full 1¼ in. of travel to the stock forks fitted to these models. Kits contain two extra strength steel dampener rods with turned steel ends, and two heavy-duty, cadmium-plated booster springs. Easy to follow instructions and an Allen wrench of the proper size for assembly are included. Suggested list price is $34.95. For additional information write to Fun 'N Fast, Dept. CW-6, 18550 Parthenia St., Northridge, CA 91324.
(Continued on page 118)
Continued from page 116
BMW FAIRING BY AVON
Avon's new BMW fairing, distributed by Butler & Smith Inc., is designed to fit all/5 models. The manufacturer claims that these fairings offer the least wind resistance of any on the market. A chrome steel safety bar is an integral part of the unit. Strong, resilient fiberglass is used, and complete mounting hardware is supplied. Three colors (black, white or polaris silver) are available. Avon model AV 70-1 fairings may be purchased at all authorized BMW dealers.
HERO BELT
Hero Belt is a new product offered by The Dirt Rider to serve the emergency situation, whether it be towing a stranded rider or holding up your pants. The belt is easily taken apart to become an 8-ft.-plus-long braided nylon rope with a breaking strength of over 1000 lb. Construction of the buckle closure is a strong, 20-in. nylon webbing strap, which also has some utility in an emergency. Two sizes are available: small, fitting 28-to 34-in. waists, and large, for 36-to 42-in. waists. Price is $3.75, postpaid. Order from: The Dirt Rider, Dept. CW-6, P.O. Box 14422, Albuquerque, NM 87111.
(Continued on page 120)
Continued from page 118
MOTOCROSS HANDLEBARS
Flanders is offering their motocross series handlebars in four new shapes. Composed of seamless-redrawn tubing, the bars are capable of withstanding a great deal of punishment, and the center sections have been knurled to prevent slippage during stress. The bars are very wide to allow for modification with a hacksaw to suit personal preferences. All four shapes are available in chrome, with or without a crossbar, and in anodized black, with a crossbar. Order by part number G-1, 2, 3, or 4. Retail price is $12.75 without crossbar, and $15.75 with crossbar. For more information, write Flanders Co., Dept, CW-6, Box 2297d, Pasadena, CA 91105.
PACER'S NEW PLUG PRODUCT
For those dual-purpose Yamaha Enduro models that must perform well in both on-the-street and off-road conditions, Pacer has designed a pair of plugs which will help them do just that. The plugs will fit all models from 125 through 360cc. Made of machined aluminum, they fit exactly into the holes where the tachometer and speedometer drive cables have been removed to lighten weight of the machine for off-road competition. The O-ring seals are used to assure more complete protection against dirt and mud entering the works. The tachometer plug (photo left) has a milled flat for indexing on the engine, and both plugs are retained with the stock clamps. Retail price per set is $3.39, available only through selected motorcycle dealers. For more information and a color brochure of other products and accessories available through Pacer, write Pacer Consolidated Industries, Dept. CW-6, 17841 E. Valley Blvd., City of Industry, CA 91745. Enclose 25 cents for handling and specify item number G-6.
(Continued on page 122)
Continued from page 120
CUSTOM FLAG TANKS
The latest creations from the Fiberglas Works are these hand-laminated, custom styled gas tanks which carry a lifetime guarantee. The color-impregnated white and blue metal-flake designs will never fade or wear off. All tanks feature universal center mounts with either 1-, 2-, or 3-in. tunnels. In most cases, they are bolt on items for H-D, Honda, Triumph, and BSA models. Each tank comes with two petcock fittings and is priced at $64.95. A special fiberglass American flag-designed sportster rear fender is also available at $34.95. All are manufactured by the Fiberglas Works, Dept. CW-6, 2600 Soquel Ave., Santa Cruz, CA 95060.
HODAKA BIG BORE KIT
Owners of 98-cc Hodaka motorcycles (Hodaka ACE 100, ACE 100B, and ACE 100MX) now have available to them a 125-cc conversion kit, offered by Webco Inc. The fully race-tested kit offers an approximate increase of 25 percent in power. Coupled with its extreme light weight, it should prove to be competitive in its class. Due to the increased finning on the Webco "Big Bore" cylinder barrel and head, the engine will be more able to utilize the increase in power without overheating. Included in the kit is an all new alloy head and cylinder, a 56-mm piston, and all gaskets, nuts, bolts and washers necessary to completely install the unit. The part number is 2141, and price is $129.95. Available through motorcycle dealers throughout the U.S. and Canada.
SPECIAL ENGINE STAND
Joe Bolger Products has created a special engine stand to facilitate engine overhauls. Constructed of heavy-gauge square tubing, the stand has been strength tested to 800 lb. successfully. It is equipped with a locking caster of the forward leg, and the drain pan stand pulls off to make it possible to flush cases or run the leg under a bench. The cases can be split and a complete overhaul can be carried out without removing the engine from the stand. Mounting the engine is made easy by dropping the stand to its lowest position. The engine can be rotated a full 360 degrees, and raised or lowered through a 45-degree range. An adapter to attach the engine to the stand has been built for the 750 Honda, and it can be used for other Honda units as well. Any engine from 50 to 1200cc's can be attached by simply bolting the particular adapter to the stand. Rotating and vertical adjustment possibilities are infinite; there are no holes, pins or "slop" to bother the mechanic during critical operations. The stand is immediately available and can be shipped on short notice. For further information, mail inquiries to Joe Bolger Products, Dept. CW-6, Summer St., Barre, Mass.
LOCK YOUR HELMET
Allen Bros. & Co. has announced a unique method of protecting or carrying the safety helmet. The "Helmet-Lox" is a heavily chrome plated, all steel bracket that can be mounted on most front or rear fenders and locked in position for complete protection of the helmet. Just 12 in. of fender space is needed to attach this useful holder. Retail price is $12.95, postage paid. Write to Allen Bros. and Co., Dept. CW-6, Rt. 1, Box 982-A, Dallas, TX 75224. Dealer inquiries are invited.
TRAIL-BREAKER MARK IV
Rokon, Inc. is offering the Trail-Breaker Mark IV, an all-terrain vehicle equipped with two-wheel drive. A smaller version of the Explorer Mark III, it is capable of maneuvering at speeds as slow as 1/2 mph. Top speed is 30 mph. According to the manufacturer, it will climb a 50-degree slope. A new automatic torque converter aids ease of handling. No shifting is required. The extra wide, low pressure tires, which leave less of an impression in dirt than a man's footprints, should appeal to conservationists. Additionally, it is equipped with a U.S. forestry qualified muffler, and can be registered for road travel, with options. For further information, write to Rokon, Inc., Dept. CW-6, 160 Emerald St., Keene, NH 03431.
NO-FLAT
Sudden flat tires that can prove disastrous to motorcyclists can be prevented with the addition of No-Flat, manufactured by Tesco Products. Following the insertion of four ounces of No-Flat in a motorcycle tire (eight ounces are required for automobile tires), the manufacturer claims that punctures up to 1/8 in. in diameter will be sealed instantly for the life of the tire. No-Flat can be used in extreme climactic conditions ranging from intense desert heat to freezing Alaskan weather. It is odorless, nonflammable, water soluble, and cannot affect wheel balance. Distributed by Marketing Consultants Ltd. of Calif., No-Flat costs $1.95 per eight ounce bottle.
FREE PERFORMANCE PAMPHLET
How to Increase Motorcycle Performance Through Better Lubrication Techniques is now available to all motorcyclists. Proper lubrication techniques are a mystery to many riders. This booklet explains the most effective uses and the basic differences between chemical, petroleum and bean based oils. Useful information on proper oil/gasoline mixing ratios and some basic ideas for improving the effectiveness of oil injection systems are also covered. Simply send a stamped self-addressed envelope to SCO/MAR Enterprises Inc., Dept. CW-6, 15720 Ventura Blvd., Encino, Calif., or ask for it at your local dealer.
